Gold Plating Bath
Doug Taylor Metal Finishing Co are a family-run business, established in 1981 and providing comprehensive Gold Plating Bath.
The business was started by Doug Taylor himself, a keen chemist who began Gold Plating in 1958, and there are now three generations of the Taylor family involved in the business.
All of our Gold Plating Bath work is carried-out to British Standards, and we incorporate additional inspection points at each element of the gold plating Bath process to ensure that the end result provides the best possible finish that the metal part will allow.
Everything is checked whilst wrapped to ensure the item is of the highest quality before being sent out or collected. We will handle everything from single items to larger volumes, subject to required turnaround times.
Process for Gold Plating Bath
All of our Gold Plating Bath work is carried-out in house, using modern processing plant capable of providing the highest quality 22 carat equivalent gold plating services to meet the varied demands of both trade and private customers.
There are no extra charges for triple-plating, because the transformation process (strip – polish – copper – nickel – gold) is to British Standards, so is included within our pricing. This process naturally takes longer to undertake but ensures a good finish at every stage of the gold plating process.
It also allows us to undertake gold plating in Bath for sizes from household items right down to intricate items such as medals and rings, eliminating the chances of any single item being lost. We can handle single items up to combined maximum dimensions of 10in (25cm) long, 10in (25cm) wide and 11in (27.5cm) deep.
We are proud to retain to this day a traditional gold plating process where every item is hand-wired. Our manual process also achieves a thicker finish, ultimately improving the end quality and depth of the gold finish.
Is any Preparation Work needed by the Customer?
No, generally you can supply your item to us in its current condition and we will undertake all preparations (strip and polish) before undergoing the transformation process.
The only exception would be if we have to manually remove heavy paint layers or lacquers from the metal you send to us, in which case a small extra charge would apply to the stripping process.
All details of this will be included in the quotation we provide to you before commencing work.
Are there any items that are not suitable for Gold Plating?
Items that are made from Pewter or Stainless Steel cannot be gold-plated.
Accreditations / Industry Standards and Awards
All of our Electroplating processes adhere to the appropriate British Standards. We are members of the Federation of Small Businesses and approved contractors to Leonardo Helicopters (formerly Agusta Westland)
Usually our turnaround times are up to two weeks but during our busiest periods our turnaround time can increase to four weeks or more. If you require a quicker turnaround, please call us to discuss your project and we can see if we can accommodate you.
Please contact us and we will provide an all inclusive quote based on your requirements.
If you would like a quick quote, please fill in our form on the right of the page, include an image of the item(s) that you wish to be plated and list any defects, rust, dents, holes and deep pitting and we will be able to provide an accurate quote within 24 hours.
Get in touch
Give your treasured items a new gleaming look, call us on 01934 820 454 or email us to discuss your project.