Zinc Plating Exeter
Doug Taylor Metal Finishing Co are a family-run business, established in 1981 and providing comprehensive Zinc Plating Exeter.
The business was started by Doug Taylor himself, a keen chemist who began Zinc Plating in 1958, and there are now three generations of the Taylor family involved in the business.
All of our Zinc Plating Exeter are carried-out to British Standards, and we incorporate additional inspection points at each element of the zinc plating process to ensure that the end result provides the best possible finish that the metal part will allow.
Everything is checked whilst wrapped to ensure the item is of the highest quality before being sent out or collected. We will handle everything from single items to larger volumes, subject to required turnaround times.
Process for Zinc Plating Exeter
All of our Zinc Plating in Exeter are carried-out in house, using modern processing plant capable of providing the highest quality Zinc Plating Exeter to meet the varied demands of both trade and private customers. As well as the standard zinc-plated finish, we offer two additional specialist finishes:
- Tripass ELV Tech Blue (zinc and clear passivate) – provides a silver-like finish.
- Iridite Ly-FPC (zinc and colour passivate) – provides a gold-like colour finish
The transformation process (strip – clean – acid – zinc) is to British Standards, so is included within our pricing. This process naturally takes longer to undertake but ensures a good finish at every stage of the zinc plating process.
It also allows us to undertake Zinc Plating Services Exeter for sizes from household items right down to intricate items such as nuts and bolts, eliminating the chances of any single item being lost. We can handle single items up to combined maximum dimensions of 2ft 6in (76cm) long, 2ft 6in (76cm) wide and 3ft (91cm) deep.
We are proud to retain to this day a traditional zinc plating process where every item is hand-wired. Our manual process also achieves a thicker finish, ultimately improving the end quality and depth of the zinc finish.
Is any Preparation Work needed by the Customer?
No, generally you can supply your item to us in its current condition and we will undertake all preparations (strip and polish) before undergoing the transformation process. The only exception would be if we have to manually remove heavy paint layers or lacquers from the metal you send to us, in which case a small extra charge would apply to the stripping process. All details of this will be included in the quotation we provide to you before commencing work.
Accreditations / Industry Standards and Awards
All of our Zinc Plating processes adhere to the appropriate British Standards. We are members of the Federation of Small Businesses and approved contractors to Leonardo Helicopters (formerly Agusta Westland)
We provide a twelve-month guarantee on all Zinc Plating Exeter, except die cast and aluminium components.
Usually our turnaround times are up to two weeks but during our busiest periods our turnaround time can increase to four weeks or more. If you require a quicker turnaround, please call us to discuss your project and we can see if we can accommodate you.
Please contact us and we will provide an all inclusive quote based on your requirements. If you would like a quick quote, please fill in our form on the right of the page, include an image of the item(s) that you wish to be plated and list any defects, rust, dents, holes and deep pitting and we will be able to provide an accurate quote within 24 hours.
Get in touch
Give your treasured items a new gleaming look, call us on 01934 820 454 or email us to discuss your project.